70±5 r/min Furniture Foam Dynamic Repeated Indentation Fatigue Testing Macine 0~50mm
Equipment discription:
This tester is used to test the reduction of thickness and hardness values of porous elastic material that is used for interior decoration. Put a square specimen into the tester. Sunk into the sample repeatedly with a smaller pressure head. Each impact has reach the max load within the prescribed scope at the same time. After a certain number, evaluate the performance of the sample.
Technical Parameters:
Test speed: 70±5 r/min
Test Cycles: 80 000
Upper Platen Dia:Φ250mm, Lower edge border-radius:R25mm
Lower plate 420mm*420mm,
Air hole diameter: 6.5mm; Hole center gap: 20mm;
Travel: 0~50mm
Sample load: 750±20N
Specimen size: (380±20)mmx(380±20)mmx(50±2)mm
Timer: 0~999 999
Size(WxDxH): 64x52x70cm
Weight: approx 70Kg
Power: 1¡Ó AC 220V 50Hz 3A
Standard:
GB/T 18941, GB/T 12825 and ISO 3385
|
Test speed: |
70±5 r/min |
|
Test Cycles: |
80 000 |
|
Upper Platen Dia: |
Φ250mm, Lower edge border-radius:R25mm |
|
Lower plate |
420mm*420mm |
|
Air hole diameter: |
6.5mm; Hole center gap: 20mm |
|
Travel: |
0~50mm |
|
Sample load: |
750±20N |
|
Specimen size: |
(380±20)mmx(380±20)mmx(50±2)mm |
|
Timer: |
0~999 999 |
|
Size(WxDxH): |
64x52x70cm |
|
Weight: |
approx 70Kg |
|
Power: |
1¡Ó AC 220V 50Hz 3A |
